Power & Ground Modules/Remote Receptacle Panels With Custom Back Boxes Included
For ease of installation, these units come
with devices mounted to front trim. They include power receptacles, Hampden SLR-3S, 30 amp,
twist-lock ground jacks and a 20 lug ground bus with a wire range of #6 to #14 for external ground connections. The main ground connection will accommodate up to #1/0 cable and the front trim is fabricated from 12 gauge, type 304 stainless steel, polished to a #4 satin finish.
Power & Ground Modules/Remote Receptacle Panels To Fit Customer Furnished Electrical Gang Boxes
These particular modules are ideal where additional ground jacks and power receptacles are required, but where lugs for hard grounding of non-electrical items are not necessary.
They include both Hampden SLR-3S, 30 amp, twist-lock ground jacks and power receptacles. A single lug for a wire range of #2 to #14 is provided for the incoming ground. These modules use standard electrical masonry gang boxes, therefore back boxes are not included.
Ordering Information
| Model # |
# of Power
Receptacles |
Duplex Parallel Blade
or Twist-Lock |
# of Ground
Jacks |
Electrical Box |
| RRP |
-X |
X |
X |
-X |
(Add suffixes as required) |
|
|
D - Duplex
S - Simplex
T - Twist-Lock |
|
|
B/B |
Custom Back Box Included |
|
|
|
C/F |
Standard Gang Box Furnished By Customer |
Example: |
RRP-4D4 B/B Remote Receptacle Panel with 4 Duplex Receptacles and 4 Ground Jacks (back box included). |
Example:
|
RRP-2D2 C/F Remote Receptacle Panel with 2 Duplex Receptacles and 2 Ground Jacks (contractor furnished back boxes).
|
