Laser and X-ray Isolated Power Systems Description Control Options Components XTL Accessories Installation Ordering Specifications Download Drawings     Model XTL - Description With laser procedures increasing significantly at most hospitals, PG LIFELINK has developed an unprecedented isolated power system to meet ever-growing power requirements, eliminate scheduling difficulties, and above all, ensure safety. Most existing power supplies, designed to lock out other outlets until procedures are complete, cannot handle the growing power demands required by laser procedures. These older units can also be accidentally turned off before a procedure is finished. A specially designed power supply, available from PG LIFELINK solves these problems and more. Power is controlled through a series of mercury contactors activated by the PG LIFELINK Model ALO-RS Laser Module or the AXO-RS X-ray Module. The new Plug Control Style Power Panel with its unique features can be energized in the operating room simply by opening the door over the receptacle. The machine is then "locked on" until someone inside the operating room unplugs it. This feature eliminates accidental shutdowns caused by someone outside the operating room. And only the circuits in those rooms that are activated contribute to the system's leakage, helping reduce "nuisance" alarms. With this system, power is selectively provided to the location where needed. If there are multiple laser machines, additional circuits can be energized through the corresponding CLO-RS unit for that circuit. The panel can serve up to 12 locations without lockout or with the lockout feature. The Plug Control Style Laser Panel with lockout can also limit the number of energized outlets, allowing the hospital to control the number of laser procedures performed at any one time. The maximum number of energized outlets are field adjustable from one to four. The transformer is sized to handle the load. Specify NEMA configuration of the receptacle required.