(1) Back Box is made of #12 gauge galvanized steel and is flush mounted in the wall.
(2) Chassis mounts on four studs welded into the back box and is factory prewired to field
wiring terminal block and master terminal board.
(3) Isolation Transformer with electrostatic shield. Primary voltage — 120, 208, 220, 240, 277 or 480.
Secondary voltage — 110 or 120.
(4) Field Wiring Compartment formed by baffle fastened to the chassis.
(5) Terminal Blocks for field wiring, which includes transformer primary feeder, outgoing
circuits to surgical lights and wall-mounted receptacles, and remote LIM signals if required.
(6) Ground Bus for connection of all internal and branch ground conductors.
(7) Master Terminal Board for connection of factory-made wiring harness from panel cover.
