Product Configurator

The Plus Series Isolated Power Panel (Model IPP-P) is the standard panel for most installations. The Model IPP-P Panel is typically designed to provide 120v isolated power to the circuits within a single operating or patient procedure room. For special applications, the system can be configured to provide high volt isolated output such as 208V, 220V, or 240V. It is recommended that each Operating Room be designed with a minimum of two 7.5 kVA Isolated Power Panels powered on Critical Branch on separate transfer switches.

The Plus Series Isolated Power Panel (Model IPX-P) Duplex Isolated Power Supply System contains two separate Isolated Power Systems in one enclosure minimizing wall space requirement and simplifying installation. The IPX-P requires two separate power feeds for each side. Design capabilities and requirements are the same as the IPP-P single panels.

The Plus Series Dual Voltage Isolated Power Panel (Model IPD-P) provides both low and high volt output requiring only one feed using one primary transformer and two secondary transformers. This allows users to have high volt output (208V, 220V, or 240V) to power laser equipment without requiring an additional power feed.

The Plus Series Laser Isolated Power (Model IPL-P) is a more cost-effective way of providing high volt output (208V, 220V, or 240V) to power laser equipment in multiple operating rooms. One laser panel centrally located to a group of operating rooms can be connected to up to 12 laser outlets. A PLC controller in the panel monitors load and will not energize more than receptacles than transformer capacity.

The Plus Series Isolated Power Panel (Model IPP-P) is the standard panel for most installations. The Model IPP-P Panel is typically designed to provide 120v isolated power to the circuits within a single operating or patient procedure room. For special applications, the system can be configured to provide high volt isolated output such as 208V, 220V, or 240V. It is recommended that each Operating Room be designed with a minimum of two 7.5 kVA Isolated Power Panels powered on Critical Branch on separate transfer switches.

The Plus Series Isolated Power Panel (Model IPX-P) Duplex Isolated Power Supply System contains two separate Isolated Power Systems in one enclosure minimizing wall space requirement and simplifying installation. The IPX-P requires two separate power feeds for each side. Design capabilities and requirements are the same as the IPP-P single panels.

The Plus Series Dual Voltage Isolated Power Panel (Model IPD-P) provides both low and high volt output requiring only one feed using one primary transformer and two secondary transformers. This allows users to have high volt output (208V, 220V, or 240V) to power laser equipment without requiring an additional power feed.

The Plus Series Laser Isolated Power (Model IPL-P) is a more cost-effective way of providing high volt output (208V, 220V, or 240V) to power laser equipment in multiple operating rooms. One laser panel centrally located to a group of operating rooms can be connected to up to 12 laser outlets. A PLC controller in the panel monitors load and will not energize more than receptacles than transformer capacity.

The Plus Series Isolated Power Panel (Model IPP-P) is the standard panel for most installations. The Model IPP-P Panel is typically designed to provide 120v isolated power to the circuits within a single operating or patient procedure room. For special applications, the system can be configured to provide high volt isolated output such as 208V, 220V, or 240V. It is recommended that each Operating Room be designed with a minimum of two 7.5 kVA Isolated Power Panels powered on Critical Branch on separate transfer switches.

The Plus Series Isolated Power Panel (Model IPX-P) Duplex Isolated Power Supply System contains two separate Isolated Power Systems in one enclosure minimizing wall space requirement and simplifying installation. The IPX-P requires two separate power feeds for each side. Design capabilities and requirements are the same as the IPP-P single panels.

The Plus Series Dual Voltage Isolated Power Panel (Model IPD-P) provides both low and high volt output requiring only one feed using one primary transformer and two secondary transformers. This allows users to have high volt output (208V, 220V, or 240V) to power laser equipment without requiring an additional power feed.

The Plus Series Laser Isolated Power (Model IPL-P) is a more cost-effective way of providing high volt output (208V, 220V, or 240V) to power laser equipment in multiple operating rooms. One laser panel centrally located to a group of operating rooms can be connected to up to 12 laser outlets. A PLC controller in the panel monitors load and will not energize more than receptacles than transformer capacity.